Now you may be wondering – what is the difference between three and gaming mouse Reviews|https://Pcbuildinsight.com/ four-pin connections? It’s all about a feature called Pulse Width Modulation. With this feature, which is enabled through the fourth pin, a computer can control the speed of a fan connected to its motherboard. Having this is nice because the fan can automatically adjust its speed based on internal temperatures or user pres

Once you’ve removed the sticker and rubber plug on your fan, apply lubricant onto the raised metal nub. Only a small amount is necessary as the rotational forces of the fan will pull the grease into its inner workings, which will then coat the dried-out beari

Originally, I wanted to just get a 4-core processor, but it was pretty much at the same price as this 6-core model, so I just opted for more cores because I didn’t really have to pay more anyway. I didn’t get a more powerful CPU cooling solution because it would have made me go over my budget, plus I don’t plan on overclocking the CPU. If you plan on overclocking, I’d definitely recommend a bigger fan or a water-cooling solut

The fan you purchased should come with at least four screws. These are usually short and stubby like the one in the photo below. However, the screws may be longer if they are meant to install alongside another piece of hardware, such as a radiator used in a liquid-cooling syst

With the arrival of Spring in the Northern Hemisphere, houses across the globe get a nice cleaning to rid them of dirt and clutter that has accumulated over the past year. Dust and junk also settle on our computer. Whether your PC is suffering from a clocked up fan or an overloaded hard drive, it is time to give it a thorough spring cleaning. With the following checklist this will be a bre

I hope that you enjoy your new solid state drive. You’ll no doubt notice that programs load much more quickly than before. Boot times will also be quicker. Because SSDs tend to have small storage capacities it’s a good idea to manage data so that only important files and programs are on new drive. See our SSD management guide for m

There’s nothing else to note about installing drivers. They install like any other software. Just pop in the CD or run the executable and follow the installation wizard’s instructions. You may need to reboot after installation is compl

Most motherboards come with two to four system fan connections. If you’re installing more fans than your motherboard can support you’ll need to connect the additional fans directly to your power supply . Some supplies will come with three-pin connectors for this purpose. Others require that you use a Molex adapt

Once you have a fan of the correct size you need to open your case and line up the fan with the mounting area. It will have four screw holes, as will the fan, so you just need to line up the screw holes on e

Slide the SSD into its bracket, lining up the screw holes in the SSD or the 3.5″ adapter with the holes in the drive bay. Make sure to install the drive so that its SATA power and data connectors are facing the motherbo

Similarly, you may get away with reusing old storage devices (such as a hard disk drive used as a data store rather than for installing games or applications), power supplies (as long as they’re suitable for new motherboards, drives and graphics cards), card readers or case-mounted USB h

The measurement is the size of the fan on each side. Just break out a tape measure if you’re not sure what size you need. Fans for purchase should be clearly labeled by size and the size is universal, which means fans from different companies will fit into the same mounting bracket as long as the size matc

There are two ways to place an operating system on the new drive. One is to clone the data on your previous drive to the new one. The other is to start fresh and put a new installation of your operating system on the new dr

Installation is as you would expect. Just insert the screws into the holes drilled in the case and then through the holes in the fan itself. Righty-tighty until the screw is flush with the mount and can’t be tightened further. Because the screws usually have a very flat base you may find that inserting them is difficult. That’s another reason to temporarily tape the fan in place – it will make inserting the screw eas

Install the CPU fan by removing the plastic from the bottom (careful, thermal paste is applied that needs to go directly onto the CPU!) and place it onto the CPU. There should be braces on the motherboard surrounding the CPU holder where you can lock the fan into place. Connect the CPU fan to the motherboard (see manu

A study by the University of Arizona found that keyboards are dirtier than a toilet seat . Frankly, that shouldn’t come as a surprise. When was the last time you cleaned your keyboard? Dirty keyboards are a health hazard and a spring cleaning is quick and e