Internet Service Providers (ISPs) also throttle traffic from Steam and other providers. They do this to prioritize specific data types, such as online shopping and social networking over high bandwidth activities such as online gaming, downloading, and video stream

Then again, standard computers and phones cannot be the key element of a low budget space program or be integrated into a remote controlled car. The price of the Raspberry Pi alone is reason enough to buy it – this computer is just as versatile (if not more) than a standard desktop, laptop or even a ph

The RAM support is a bit lacking with a maximum of 8 GB and supported speed of 1333 MHz (or 1866 MHz when overclocking), but it’s a sacrifice I had to make. You’re always welcome to overclock the RAM if you’d like, but I enjoy hardware longevity and decided not to enable it as long as I have it. The SATA ports also only go up to 3 Gbps, but that’s fairly irrelevant when it comes to actual gaming performance — it will only affect loading times. On a side note, the motherboard also includes dedicated Radeon graphics that are built onto the motherboard itself, custom PC builds|https://pcbuildinsight.com/ which is nice, but irrelevant since we’ll be using a more powerful dedicated graphics card anyw

Computers are complex, however, and this can lead to headaches when trying to upgrade. Nothing is more frustrating than finding out that you have a compatibility issue while you’re in the process of installing new hardware. Let’s review 4 potential trouble spots you should check before digging into your desktop’s intern

If the fan is installed and has power it should start to spin as soon as the system begins to boot – if it does not, check the power connection again. Something may have come loose or the fan may be fau

Rattling fans produce loud noises because they have suffered a bearing failure , a fault common to both sleeve and ball-type fans. When a failure occurs, it means the lubrication greasing the sleeve or ball bearings has dried out, causing the bearing to grind on plastic. Fortunately, regreasing the fan’s bearings will often fix the prob

Installing a new cooling fan is often the best way to decrease heat. It also can be a good way to reduce noise (if the replacement fan is quieter, of course). Adding a fan is one of the easier upgrades a user can perf

Installation is as you would expect. Just insert the screws into the holes drilled in the case and then through the holes in the fan itself. Righty-tighty until the screw is flush with the mount and can’t be tightened further. Because the screws usually have a very flat base you may find that inserting them is difficult. That’s another reason to temporarily tape the fan in place – it will make inserting the screw eas

I was asked recently why I find the Raspberry Pi so fascinating. After all, it doesn’t run popular MMORPGs, it can’t easily be used as a portable computer and it’s not ideal for things like multimedia production. When I pointed out the possibilities such as retro gaming and building a compact media centre, my friend confidently reminded me that standard desktops and laptops and even phones can do the same thi

Computers have changed a lot over the last decade, but one thing remains the same – the need for cooling. Efficiency has pushed temperatures down but hasn’t eliminated heat as an issue. That’s particularly true for high-end workstations and gaming

Operating systems generally are not a limitation when you are upgrading hardware, which is why the topic shows up last in this article. This doesn’t mean they are never an issue. It’s possible that you may find yourself with a hardware upgrade that is physically compatible with your system in every way but still doesn’t w

For those of us experiencing issues with dust or fan noise, fixing either of these issues doesn’t require much effort or money at all. Using the two methods outlined in this article, adding a dust filter and lubricating a rattling fan, will improve long-term cooling, ease of maintenance and acoustic qualit

Once you’ve removed the sticker and rubber plug on your fan, apply lubricant onto the raised metal nub. Only a small amount is necessary as the rotational forces of the fan will pull the grease into its inner workings, which will then coat the dried-out beari

Also make sure that you have the fan mounted so it blows in the proper direction. The fan should have a printed or molded arrow that shows the direction air flows. Fans can be installed as either an intake (air blowing in) or exhaust (air blowing out). There may also be an arrow that shows the direction of s

Fan screens don’t cost very much and can attach to your computer quite easily. My two favorite types are the SilverStone magnetic filters and the StarTech filters. Simply measure your case’s intake vents horizontally or vertically and buy a matching size. For example, you will want to match a 120mm opening with a 120mm dust fil